Turning ON Your Transmitter
(TX):
When the transmitter (TX) is off
(in Standby Mode) in order to turn it on (On-Line
Mode) you must activate the pushbutton by pushing
on the product label until you feel a slight click
and hold it in for about 3 – 7 seconds. The
Indicator LED will initially flash rapidly indicating
it is in Standby Mode. Once the LED is constant (no
flashing) release the pushbutton immediately and the
device should now be active in On-Line Mode. If you
hold the pushbutton to long (more than 7 seconds)
the LED will turn off and the transmitter will return
to Standby Mode. Online mode can be verified if the
LED remains off when the pushbutton is pressed momentarily
(less than 2 seconds).
Click
here to view a short demonstration video
(Windows
Media Player is required. Click here to download a
free copy)
Turning OFF Your Transmitter
(TX)
When the transmitter is ON (Online Mode) it can be
turned OFF (Standby Mode) by activating the pushbutton
by pushing on the product label until you feel a slight
click and hold it in for 8 or more seconds then release
it. Your transmitter should now be OFF.
Standby Mode can be verified by a
rapid flashing of the LED when the pushbutton is pressed
momentarily (less than 2 seconds).
Click
here to view a short demonstration video
(Windows
Media Player is required. Click here to download a
free copy)
Turning ON Your Receiver
(RX)
When the Receiver (RX) is off (in Standby Mode) in
order to turn it on (On-Line Mode) you must activate
the pushbutton by pressing on the product label until
you feel a slight click and hold it in for about 3
– 7 seconds. The Indicator LED will initially
flash rapidly indicating it is in Standby Mode. Once
the LED is off (no flashing) or when the display is
reset to zero release the pushbutton immediately.
The device should now be active in On-Line Mode. If
you hold the pushbutton to long (more than 7 seconds)
the Receiver will return to Standby Mode. Online mode
can be verified if the LED remains off when the pushbutton
is pressed momentarily (less than 2 seconds).
Click
here to view a short demonstration video
(Windows
Media Player is required. Click here to download a
free copy)
Turning OFF Your Receiver
(RX)
When the Receiver is ON (Online Mode) it can be turned
OFF (Standby Mode) by pressing the pushbutton on the
product label until you feel a slight click and hold
it in for 8 or more seconds then release it. Your
transmitter should now be OFF.
Standby Mode is verified when the
LCD display is continuously counting about once every
second.
Click
here to view a short demonstration video
(Windows
Media Player is required. Click here to download a
free copy)
Putting Your Receiver (RX)
In Setup Mode
Setup mode is used for alignment and to send a “Setup
Signal” to a Sensor Server. With the receiver
ON (in Online Mode) you can place it in setup mode
by momentarily pressing the pushbutton on the label
until you feel a slight click for less than 1 second.
The indicator LED will come on constant only if the
transmitter is On-line and it is aligned as explained
in the installation guide. The receiver will remain
in Setup Mode for about 2 minutes to aid in alignment.
If the LED indicator is on constantly for 8 seconds
indicating proper alignment the Receiver will exit
setup mode before 2 minutes.
Click
here to view a short demonstration video
(Windows
Media Player is required. Click here to download
a free copy)
Resetting The Display of
Your Receiver
With your receiver in online mode the display can
be reset by pressing the pushbutton on the label until
you feel a slight click and hold it until the display
resets zero then release the pushbutton immediately.
If the pushbutton is held for more than 5 seconds
the sensor will be turned OFF (Standby Mode).
Click
here to view a short demonstration video
(Windows
Media Player is required. Click here to download a
free copy)
