Q10 Vehicle Counter
with Multi Line Display & PC Integration
Q10 Vehicle Counters are simple to install and provide a system to record data based on the number of
people that pass by the selected sensor. These systems use a PLC (Programmable Logic Controller) to
monitor and record data generated from a variety of sensors. This data can be used to generate
reports and display statistical information on a computer. With a variety of sensors available almost any
people counting application for can be accommodated. The SenSource Q10-ALPHA Controller/Display
& People Counter is one the most advanced yet cost effective systems available on the market today.
Monitor traffic and occupancy levels of up to 19 entrances with non-directional counting (counts up
regardless of direction) or 9 entrances with directional counting (counts up when people enter and
down when people exit). Control up to 9 external devices based on timing, counts, or external sensor
input (control examples include: lighting systems, flashing signs, digital displays - activate a buzzer or
light to warn when capacity is reached). With features not available in systems much more expensive,
the Q10-ALPHA system will surpass all your expectations.
TC-ALPHA Features:
Directional sensing reflects total number of people that have
entered the monitored area/s (up to 19) and current population
Optional PC interface and Software for data logging reporting
Reports can be exported in CSV or MS-Excel formats and saved to your hard
drive or emailed automatically.
Modular system accommodates a variety of sensors and allows
sensor and display to be mounted together or separately
Battery Backup (counts are not lost if power is lost)
Multi-Key front panel reset prevents tampering and accidental reset
Safe low voltage 24V DC (plug-in supply included with 10 ft cable)
Select a variety of sensors to fit your application
Outputs can control external devices such as warning lights and/or beepers
to indicate when critical population level is reached
Q10 system sensors are categorized by either non-directional (counts up regardless of traffic direction)
and directional (counts incoming and outgoing traffic separately). The benefit of having non-directional
systems is that it allows you to monitor more entry/exit points per controller and gives you the ability to
monitor all entry/exit points from a single location. The benefit of having a directional system is that it
allows you to monitor not only incoming and outgoing counts for each entry/exit, you can also view the
current population of your facility.
BX5M Retroreflective Horizontal Sensor (Non-Directional)(counts up regardless of traffic direction)
16 ft maximum horizontal sensing distance
Built-In adjustable time delay
Sensor includes reflector and 10 ft cable (cable can be increased up to 500 ft)
Small Size: 0.98”w x 2.95”d x 2.56”h
2BX5M Directional Horizontal Sensor
(counts incoming and outgoing traffic separately)
16ft maximum horizontal sensing distance
Built-in adjustable time delay
Sensor includes 10ft cable (cable can be increased up to 500 ft)
Small Size: 0.98”w x 2.95”d x 2.56”h
BA2M Non-Directional Proximity Sensor
(counts up regardless of traffic direction)
6ft maximum horizontal or vertical sensing distance
No reflector required
Sensor includes 10ft cable
2BA2M Directional, Proximity Sensor
(counts incoming and outgoing traffic separately)
6ft maximum horizontal or vertical sensing distance
