Call 1-877-855-6661
SenSource
people counters
visitor counters
SenSource Support
about SenSource
contact SenSource
SenSource testimonials
Client list
SenSource promotions
SenSource careers
SenSource sitemap

PCW-2TB06-F
Battery Powered Photoelectric Directional People Counter
The SenSource PCW-2TB06-F is a battery operated directional dual beam people counter with an integral 418 MHz data transmitter. This system consists of a dual IR beam transmitter and a dual IR beam receiver which can operate up to 20ft apart. Dual beams enable this system to count people separately in two directions (IN and OUT) +1 each time the beams are broken. The receiver has an internal counter with a radio transmitter, facilitating wireless data retreival for PC integration or a complete networked system with central data collection.
 
 

PCW-2TB06-F Features:

  • Front firing sensors quickly Install in minutes
  • Battery operated for truly wireless installation
  • RF data transmitter enables wireless data retrieval (This system must be
    used with a Sensor Server or Count Server for data collection)
  • Integrated mounting flange for easy mounting
  • User replaceable batteries last about 2 years in use
  • Starting at $735/each
    Click here for PDF Brochure

Ordering:

  • PCW-2TB06-F (Front Firing Battery Powered Directional People Counter
    and 418Mhz Data Transmitter)
  • PCW-SSRX4 (Sensor Server with 418Mhz data receiver and wired Ethernet
    (TCP/IP) or Serial (RS232) communication)
    Note: At least one Sensor Server is required to receive data from one or
    more sensors

Optional Upgrades(request upgrade brochure or call SenSource
for more information):

  • PCW-RTX4.9.9 (Repeater – Receives 418Mhz – 900Mhz, retransmits at
    900Mhz – Used to increase RF distance
  • PCW-SSRX9 (Sensor Server with 900Mhz data receiver and wired Ethernet
    (TCP/IP) or Serial (RS232) communication)
    Note: If a repeater is necessary you must use a 900Mhz Sensor Server
    (PCW-SSRX9)
 Example Configuration:
Specifications:
Parameter MIN TYP MAX UNITS
IR Sensor Range (can be increased to 40ft) .5 - 20 Feet
Battery life IR receiver 1 3 6.5 Years
Battery life IR transmitter .33 (40ft version)* 1 5(OFF) Years
Radio Range – Line of Site - 200 600 Feet
Radio Range – Indoor - 100 200 Feet
Battery type Lithium 3.6V, Size = AA (3 in receiver, 4 in transmitter)
Enclosure 6.3L” x 2W” x 1D” ABS Plastic (Can be sealed for outdoor use)*

 
Sensor Server
With state of the art technology and user friendly software, data collection is now made simple. The Sensor Server receives, logs, processes and serves up data received from up to 100 wireless sensors. Data can be automatically or manually downloaded from one or more local and remote Sensor Servers to one central PC using wired Ethernet (TCP/IP) or Serial (RS232) protocol. Historical data logs contain information to identify each location and each specific sensor within a location along with date and time stamped values. The Sensor Server can be programmed, controlled and queried using Server Manager Software or directly by using simple ASCII commands. It contains battery backed RAM so data is not lost with power outages. Server and sensor status with current values can be easily viewed in near real time with any internet browser. Your network cannot be accessed wirelessly through the Sensor Server since wireless communication is only used for data exchange between the Sensors and the Sensor Server.
 
 

Ordering:

  • PCW-SSRX4 Sensor Server with 418 Mhz receiver and wired Ethernet
    (TCP/IP) or Serial (RS232) data ports
  • PCW-SSRX9 Sensor Server with 900 Mhz receiver and wired Ethernet
    (TCP/IP) or Serial (RS232) data ports
Export Data or Generate Reports & Graphs

*Server Manager Software (Purchased Separately) - Provides centralized reporting, configuration of hardware, downloading data, event alerts, customized graphing, report generation with the ability to group data based on predefined regions and much more. Call SenSource or visit our website for more information.