PC-THI60
Thermal Imaging Counter with 900Mhz Data Transmitter |
The PC-THI60 uses thermal imaging technology to count visitor traffic from above an
entry/exit. State-of-The-Art technology enables this counting system to monitor multiple
people entering and exiting at the same time. It is ideal for wide openings and/or heavy
traffic areas or areas where side mounting is not an option. It functions as a digital video
camera seeing only Infra-Red radiation emitted by people passing underneath the sensor.
The sensing area is a square on the floor whose width is approximately equal to the
mounting height; at 3.5m the unit 'sees' a 3.5x3.5m square on the floor. Mounting height
ranges from 2.5m (8ft) - 4.5m (14.75ft) can be covered with the standard lens. A 40° field
of view lens, offers mounting heights over 20ft. Units may be used as single counting
nodes, linked into networks of up to 50 individual units or configured to span a wide
opening. In the wide opening mode up to 8 units are linked to span the wide opening and
will appear to the user system as a single counter unit with a wide 'footprint'.
Data is transmitted to a 900Mhz Sensor Server (PCW-SSRX9 - See below for additional information) located up
to 1200ft away (1 mile LOS)
|
Indoor version
Outdoor version
 |
PC-THI60 Features:
- Operation independent of ambient light
- Minimal set up
- User-Definable counting areas
- Bus Connectivity up to 30 units
- Wide Opening Capability up to 8 units
- Upgradeable to include PC or Network integration
- Battery Backup (counts are not lost if power is lost)
- Cannot accidentally reset or turn off
- Magnetic reset
- Click here for PDF Brochure
|
 |
Ordering:
- PC-THI60-W (Thermal Imaging Camera with Modular 900 Mhz transmitter
and LCD display)
- PCW-SSRX9 (Sensor Server with 900 Mhz receiver)
- PCW-RTX4.9.9 (900 Mhz Repeater for extended distance from display to server)
|
| Specifications: |
| Parameter |
MIN |
TYP |
MAX |
UNITS |
Supply Voltage
|
10 |
12 |
14 |
Volts DC |
| Supply Current |
50 |
- |
80 |
mA |
| Operating Temperature |
0/32 |
- |
40/104 |
°C/°F |
| Dimensions: 111mm/4.37in diameter x 50mm/1.97in deep |
| Weight: ≤ 0.2 kg |
|
Optional Sensor Server:
Whether you're counting people, parts, or vehicle traffic, the Sensor Server processes and serves data
received from up to 100 wireless PCW series sensors equipped with an RF transmitter. Data can be
automatically or manually downloaded from one or more local and remote Sensor Servers to one
central PC (see page 4). Historical data logs contain information to identify each location and each
specific sensor within a location along with date and time stamps. The Sensor Server contains battery
backed RAM and is fully configurable both locally and remotely. Server and sensor status with current
accumulated counts can be easily viewed in near real time. Communication is established via Ethernet
TCP/IP or serial RS232 protocol. Server Manager software provide an easy way to configure, monitor,
and generate reports from one central location. |
 |
Features:
- Centralized remote or local reporting
- 900 MHz Receiver
- Supports all PCW Sensors with RF transmitters
- Communication via Ethernet (TCP/IP) or RS232
- Data Logger creates date/time stamped historical data logs of sensor counts
- Web Server – Browser page displays current status and sensor counts
- Monitors 50 directional sensors
- 8600 Historical record capacity (approximately 1yr. of data at 1 hour intervals)
Ordering:
- PCW-SSRX9 (Sensor Server with 900 Mhz receiver)
|
*Server Manager Software (Purchased Separately) - Provides centralized reporting, configuration of
hardware, downloading data, email notification, customized graphing, and report generation with the
ability to group data based on predefined regions and much more. Call SenSource or visit our website
for more information. |
| Typical configuration when used with optional Sensor Servers for multiple facilities |
