»
Setup HyperTerminal for TCP/IP Communication
- Start Menu >> All Programs >> Accessories >> Communications >> HyperTerminal
- Connection Description
- Enter a name and choose an icon for the connection
- Connect To
- Enter details for the host that you want to call
- Connect Using
- Host Address
- Port Number
- TCP/IP Properties
- File >> Properties >> Settings (Tab) >> ASCII Setup (Button)
- ASCII Setup
- ASCII Sending Check Boxes
- Send line ends with line feeds
- Echo typed characters locally
- ASCII Receiving Check Boxes
- Append line feeds to incoming line ends
» Setup HyperTerminal for Serial Communication
- Start Menu >> All Programs >> Accessories >> Communications >> HyperTerminal
- Connection Description
- Enter a name and choose an icon for the connection
- Connect To
- Enter details for the host that you want to call
- Connect Using
- Select the appropriate COM port.
- Click Configure
- COM1 Properties
- Bits per second: 19200
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow Control: None
- ASCII Setup
- File >> Properties >> Settings (Tab) >> ASCII Setup (Button)
- ASCII Sending Check Boxes
- Send line ends with line feeds
- Echo typed characters locally
- ASCII Receiving Check Boxes
- Append line feeds to incoming line ends
» Entering Commands / Receiving Responses
Enter Commands in the HyperTerminal Window.
- Prefix each command with ‹ˆB› by using [CTRL + B]
- Suffix each command with ‹CR› by using ENTER (key)
- EX: To find the IP of a device, type [CTRL + R]IP[ENTER]
Commonly-Used Commands
- Sensor Add Mode
- ATU — Turn on Auto-Add
- AF — Turn off Auto-Add
- ASU — Service Mode
- AR — Read Status
- Sensor Server ID Label
- CDSlabel — Change Label *
- CDR— Read Label
- DHCP
- CIDR — to Read
- CIDSF,T — Static IP address, DHCP off
- CIDST,T — DHCP on
- Configure Static IP Address
- CISIPaddress,subnet,gateway,dns,port *
- CIR — to Read
* Italicized text indicates parameter.
|
